ඒකක සහ මාන

For use of units of measurement in Wikipedia, see .

The definition, agreement, and practical use of units of measurement have played a crucial role in human endeavour from early ages up to this day. Disparate used to be very common. Now there is a global standard, the (SI) of units, the modern form of the . The SI has been or is in the throughout the world.

The former Weights and Measures office in .

In trade, weights and measures is often a subject of governmental regulation, to ensure fairness and transparency. The (BIPM) is tasked with ensuring worldwide uniformity of measurements and their traceability to the International System of Units (SI). is the science for developing national and internationally accepted units of weights and measures.

In physics and , units are standards for measurement of that need clear definitions to be useful. of experimental results is central to the scientific method. A standard system of units facilitates this. Scientific systems of units are a refinement of the concept of weights and measures developed long ago for commercial purposes.

Science, වෛද්‍ය විද්‍යාව, and engineering often use larger and smaller units of measurement than those used in everyday life and indicate them more precisely. The judicious selection of the units of measure can aid researchers in (see, for example, ).

In the social sciences, units of measurement are not yet standardized, and are based on .

History

මූලික ලිපිය: History of measurement

A unit of measurement is a standardised of a physical property, used as a factor to express occurring quantities of that property. Units of measurement were among the earliest tools invented by humans. Primitive societies needed rudimentary measures for many tasks: constructing dwellings of an appropriate size and shape, fashioning clothing, or bartering food or raw materials.

The earliest known uniform systems of weights and measures seem to have all been created sometime in the and among the ancient peoples of Mesopotamia, Egypt and the , and perhaps also in Persia as well.

Many systems were based on the use of parts of the body and the natural surroundings as measuring instruments. Our present knowledge of early weights and measures comes from many sources.

Systems of measurement

Traditional systems

Prior to the near global adoption of the metric system many different systems of measurement had been in use. Many of these were related to some extent or other. Often they were based on the dimensions of the human body according to the proportions described by . As a result, units of measure could vary not only from location to location, but from person to person.

Metric systems

A number of of units have evolved since the adoption of the original metric system in ප්‍රංශය in 1791. The current international standard metric system is the . An important feature of modern systems is . Each unit has a universally recognized size.

Both the and derive from earlier . Imperial units were mostly used in the and the former බ්‍රිතාන්‍ය අධිරාජ්‍යය. US customary units are still the main system of measurement used in the United States despite Congress having legally authorized metric measure on 28 July 1866. Some steps towards US have been made, particularly the redefinition of basic US units to derive exactly from SI units, so that in the US the inch is now defined as 0.0254 m (exactly), and the avoirdupois pound is now defined as 453.59237 g (exactly)

Natural systems

While the above systems of units are based on arbitrary unit values, formalised as standards, some unit values occur naturally in science. Systems of units based on these are called . Similar to natural units, (au) are a convenient of measurement used in .

Also a great number of and non-standard units may be encountered. These may include the Solar mass, the (1,000,000 tons of ), the and the weight of an .

Legal control of weights and measures

මූලික ලිපියන්: සහ

To reduce the incidence of retail fraud, many national have standard definitions of weights and measures that may be used (hence "statute measure"), and these are verified by legal officers.

Base and derived units

Different systems of units are based on different choices of a set of . The most widely used system of units is the International System of Units, or . There are seven . All can be derived from these base units.

For most quantities a unit is absolutely necessary to communicate values of that physical quantity. For example, conveying to someone a particular length without using some sort of unit is impossible, because a length cannot be described without a reference used to make sense of the value given.

But not all quantities require a unit of their own. Using physical laws, units of quantities can be expressed as combinations of units of other quantities. Thus only a small set of units is required. These units are taken as the base units. Other units are derived units. Derived units are a matter of convenience, as they can be expressed in terms of basic units. Which units are considered base units is a matter of choice.

The base units of SI are actually not the smallest set possible. Smaller sets have been defined. For example, there are unit sets in which the and have the same unit. This is based on physical laws that show that electric and magnetic field are actually different manifestations of the same phenomenon.

Calculations with units

Units as dimensions

Any value of a is expressed as a comparison to a unit of that quantity. For example, the value of a physical quantity Z is written as the product of a unit [Z] and a numerical factor:

${\displaystyle Z=n\times [Z]=n[Z].}$

The multiplication sign is usually left out, just as it is left out between variables in scientific notation of formulas. In formulas the unit [Z] can be treated as if it were a kind of physical : see for more on this treatment.

A distinction should be made between units and standards. A unit is fixed by its definition, and is independent of physical conditions such as temperature. By contrast, a standard is a physical realization of a unit, and realizes that unit only under certain physical conditions. For example, the metre is a unit, while a metal bar is a standard. One metre is the same length regardless of temperature, but a metal bar will be one metre long only at a certain temperature.

Guidelines

• Treat units algebraically. Only add like terms. When a unit is divided by itself, the division yields a unitless one. When two different units are multiplied, the result is a new unit, referred to by the combination of the units. For instance, in SI, the unit of speed is metres per second (m/s). See . A unit can be multiplied by itself, creating a unit with an exponent (e.g. m²/s²).

• Some units have special names, however these should be treated like their equivalents. For example, one newton (N) is equivalent to one kg•m/s². This creates the possibility for units with multiple designations, for example: the unit for surface tension can be referred to as either N/m (newtons per metre) or kg/s² (kilograms per second squared).

Expressing a physical value in terms of another unit

involves comparison of different standard physical values, either of a single physical quantity or of a physical quantity and a combination of other physical quantities.

Starting with:

${\displaystyle Z=n_{i}\times [Z]_{i}}$

just replace the original unit ${\displaystyle [Z]_{i}}$ with its meaning in terms of the desired unit ${\displaystyle [Z]_{j}}$, e.g. if ${\displaystyle [Z]_{i}=c_{ij}\times [Z]_{j}}$, then:

${\displaystyle Z=n_{i}\times (c_{ij}\times [Z]_{j})=(n_{i}\times c_{ij})\times [Z]_{j}}$

Now ${\displaystyle n_{i}}$ and ${\displaystyle c_{ij}}$ are both numerical values, so just calculate their product.

Or, which is just mathematically the same thing, multiply Z by unity, the product is still Z:

${\displaystyle Z=n_{i}\times [Z]_{i}\times (c_{ij}\times [Z]_{j}/[Z]_{i})}$

For example, you have an expression for a physical value Z involving the unit feet per second (${\displaystyle [Z]_{i}}$) and you want it in terms of the unit miles per hour (${\displaystyle [Z]_{j}}$):

1. Find facts relating the original unit to the desired unit:

   1 mile = 5280 feet and 1 hour = 3600 seconds

2. Next use the above equations to construct a fraction that has a value of unity and that contains units such that, when it is multiplied with the original physical value, will cancel the original units:

   ${\displaystyle 1={\frac {1\,\mathrm {mi} }{5280\,\mathrm {ft} }}\quad \mathrm {and} \quad 1={\frac {3600\,\mathrm {s} }{1\,\mathrm {h} }}}$

3. Last,multiply the original expression of the physical value by the fraction, called a , to obtain the same physical value expressed in terms of a different unit. Note: since valid conversion factors are and have a numerical value of , multiplying any physical quantity by such a conversion factor (which is 1) does not change that physical quantity.

   ${\displaystyle 52.8\,{\frac {\mathrm {ft} }{\mathrm {s} }}=52.8\,{\frac {\mathrm {ft} }{\mathrm {s} }}{\frac {1\,\mathrm {mi} }{5280\,\mathrm {ft} }}{\frac {3600\,\mathrm {s} }{1\,\mathrm {h} }}={\frac {52.8\times 3600}{5280}}\,\mathrm {mi/h} =36\,\mathrm {mi/h} }$

Or as an example using the metric system, you have a value of fuel economy in the unit litres per 100 kilometres and you want it in terms of the unit microlitres per metre:

${\displaystyle \mathrm {\frac {9\,{\rm {L}}}{100\,{\rm {km}}}} =\mathrm {\frac {9\,{\rm {L}}}{100\,{\rm {km}}}} \mathrm {\frac {1000000\,{\rm {\mu L}}}{1\,{\rm {L}}}} \mathrm {\frac {1\,{\rm {km}}}{1000\,{\rm {m}}}} ={\frac {9\times 1000000}{100\times 1000}}\,\mathrm {\mu L/m} =90\,\mathrm {\mu L/m} }$

Real-world implications

One example of the importance of agreed units is the failure of the NASA , which was accidentally destroyed on a mission to the planet in September 1999 instead of entering orbit, due to miscommunications about the value of forces: different computer programs used different units of measurement ( versus ). Enormous amounts of effort, time, and money were wasted.

On 1999 cargo flight 6316 from to was lost due to the crew confusing tower instructions (in metres) and altimeter readings (in feet). Three crew and five people on the ground were killed. Thirty seven were injured.

In 1983, a Boeing 767 (which came to be know as the ) ran out of fuel in mid-flight because of two mistakes in figuring the fuel supply of 's first aircraft to use metric measurements. This accident is apparently the result of confusion both due to the simultaneous use of metric & Imperial measures as well as mass & volume measures.

References

1. "US Metric Act of 1866". as amended by Public Law 110–69 dated August 9, 2007
2. "NIST Handbook 44 Appendix B". . 2002.
3. "Unit Mixups". US Metric Association.
4. "Mars Climate Orbiter Mishap Investigation Board Phase I Report" (PDF). NASA. 1999-11-10.
5. (Press release). NTSB. 1999 http://www.ntsb.gov/pressrel/1999/990427.htm. {{}}: Missing or empty |title= ()
6. "Korean Air incident". Aviation Safety Net.
7. "Jet's Fuel Ran Out After Metric Conversion Errors". New York Times. July 30, 1983. සම්ප්‍රවේශය 2007-08-21. Air Canada said yesterday that its Boeing 767 jet ran out of fuel in mid-flight last week because of two mistakes in figuring the fuel supply of the airline's first aircraft to use metric measurements. After both engines lost their power, the pilots made what is now thought to be the first successful emergency dead stick landing of a commercial jetliner. {{}}: Cite has empty unknown parameter: |coauthors= ()

See also

External links

General

• මිනුම (Measurements) 2010-09-21 at the Wayback Machine-සිංහල ‍ උසස් පෙළ භෞතික විද්‍යාව පිළිබඳ අන්තර්ජාල අඩවිය
• A Dictionary of Units of Measurement - Center for Mathematics and Science Education, University of North Carolina
• NIST Handbook 44, Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices
• NIST Handbook 44, Appendix C, General Tables of Units of Measurement
• Official SI website

Legal

• Canada - Weights and Measures Act 1970-71-72 2006-02-12 at the Wayback Machine
• Ireland - Metrology Act 1996 2003-09-28 at the Wayback Machine
• UK - Units of Measurement Regulations 1995
• US - Authorized tables

Metric information and associations

• Official SI website
• UK Metric Association
• US Metric Association 2007-06-25 at the Wayback Machine
• The Unified Code for Units of Measure (UCUM) 2007-07-03 at the Wayback Machine

Imperial/U.S. measure information and associations

• British Weights and Measures Association
• Kentucky Demetrification 2009-06-29 at the Wayback Machine